9/18/2023 0 Comments Preset operation code buffer atmMove the vault switch forward to aid door clearance problems. Also check that black and white, 2 wire connector is properly connected at rear of main board. This white plunger switch is located in the upper left corner of the vault, or on along the front edge of the cash dispenser tray. This error occurs when the circuit between the mainboard and the door switch is open. If this machine is typically stocked with a low amount of bills, we recommend disabling this function.Įmpty reject bin – if bin is empty, do a Cassette Total (from the settlement menu) – If that doesn’t help then check that AP, BIOS and CDU ROM versions are compatible. When “Low Cash Warning” is enabled in the Transaction Setup menu, this sensor will open when the cassette reaches (+/-) 75 bills. Low cash warning sensor on dispenser is open. If they are broken the cassette will not stay in the dispenser. Adjust the micro-switch if needed, also check the white plastic clips that hold the cassette in place. Remove and replace cassette – Check the micro-switch located on the inside left wall of the dispenser.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |